FLARES, FLARE GUNS & ACCESSORIES

Essential survival/preparedness gear. Ammo/Flare Sales Restrictions - No sales to points outside the continental U.S. Buyer must be at least 21, submit proof of age and sign disclaimer form available by clicking on the link on this site's homepage. No sales to New Jersey, nor Annapolis or Baltimore, MD, Montgomery County, MD,, Massachusetts, Washington, D.C., Chicago, IL, Evanston, Aurora, or Cicero IL, Cook Cty., IL, Michigan, San Francisco, Tiburon, Carson, Santa Ana, Los Angeles, Richmond, Berkeley, Sacramento, Oakland, CA, nor Orange, Marin, Loyo, Contra Costa, Napa counties in CA. Illinois buyers must be at least 21 and have FOID card. Check your local laws before ordering. No exceptions to this policy. No export sales. Note: Flare buyers must download, sign and return the disclaimer form available by clicking on the link on this site's homepage. Proof of age (minimum age 21) required. Questions? E-mail: FirearmsB@aol.com ATTN: FFL DEALERS, Contact Max to get on our dealer list. FAX your FFL along with your phone number to 802-479-3308.

Note: Due to the extensive paperwork necessary for HazMat shipping of flares, there is a minimum order of five boxes of flares (50-individual flare cartridges) required. We are unable to fill orders for less than five boxes of flares. No exceptions to this policy. Only one HazMat fee applies to an order of 5 boxes of flares.

AMMO BUYER'S DISCLAIMER -

THE FORM TO BE FILLED OUT BY AMMO BUYERS

terms & conditions

ONE-YEAR NRA MEMBERSHIP
~~$35.00~~ $25.00 On Sale!
nra1
Add a one-year NRA membership to your order. Special offer $10 off!!- we strongly believe in NRA membership and are offering you $10 off the price of a 1-year membership. Join now and we will send the paperwork in to the NRA for you! There is no better gift this holiday season then the gift of NRA membership - the gift of freedom! Buying NRA memberships for your children will instill in them traditional American values as they grow. We believe so strongly in NRA membership that we are absorbing $10 of the cost and will even fill out the membership application for you. Make an investment in our common future - JOIN THE NRA!

Quantity

B&D SML-37 SURVIVAL 37MM 6-INCH BARREL LAUNCHER
~~$499.99~~ $389.99 On Sale!
bdsml6
The SML-37 has found wide acceptance among those people who wish to keep a handy size launcher easily available for emergency situations. The compact SML-37 comes with a 6” barrel, lanyard, pistol grip and bead front sight. It is shipped in a sturdy telescoping corrugated box suitable for storage and transportation. The SML-37 will handle 37mm ammunition made by any manufacturer. Available ammunition includes flares, smoke and other pyrotechnic rounds for civilian use. If you are a member of law enforcement or the military you can have a variety of “Less Than Lethal” rounds at your disposal. Note: We DO NOT carry 37mm ammunition at the present time.The SML-37 is ideal for use by SWAT Teams and others with critical tactical requirements. Specifications: Top Break Barrel, Single Action/Exposed Hammer, Sights – Shotgun-Style Bead, Weight and Length - 2lbs-10 oz; 11-5/8in., Stock – Solid poly pistol grip. UNAVAILABLE FUTURE AVAILABILITY UNKNOWN

Quantity

SML-37A SURVIVAL MATTE-FINISH LAUNCHER 12-INCH BARREL
~~$439.00~~ $409.99 On Sale!
BDSML12
The SML-37A was developed for those who require a longer barrel than the 6” standard that we started this line with. We have, therefore, made a 12” barrel model available. This model has a bead front sight and includes a vertical foregrip for better control. It is shipped in a sturdy telescoping corrugated box suitable for storage and transportation. It can fire flares, smoke and other pyrotechnic rounds. Note: We DO NOT carry 37mm ammunition. Specification: Top Break, Single action, exposed hammer. Weight and Length:12” (with foregrip) 3lbs-11oz; 17-5/8in. Rails – Full length underbarrel on the 12-inch model. Stocks – Solid poly pistol grip, Vertical foregrip included. Barrel Length – 12". No license required under federal law. UNAVAILABLE! Future Availability Unknown.

Quantity

B&D Picatinny-to-Picatinny Clamp
~~$89.99~~ $64.99 On Sale!
BDPTPC
This Picatinny to Picatinny clamp can be used to connect our UBL-37 to any weapon with a Mil-Spec Picatinny rail. To maximize the security of the connection, you should choose the longest clamp that your rail will accommodate. To do this, count the number of recesses on your rail. If there are 15 or more, use the 6� clamp to maximize metal to metal contact. If there are at least 10, you can use the 4� clamp. For very short rails, use the 2� clamp. The clamp is made from mild steel and Parkerized for a matte finish. It is designed to allow two 1911 Picatinny rails to make contact and then, by tightening the cap screws, increase the force of that contact to virtually eliminate any chance of shifting.Three cap bolts (6� model, two cap bolts for the 4� and 2� models) extend through the openings between the rails to further prevent any movement of the launcher relative to your weapon. Includes Allen wrench. State size of clamp needed in comment field of your order.
Quantity

UBL-37 37mm UNDERBARREL LAUNCHER
~~$439.99~~ $409.99 On Sale!
BDUBL12
The UBL-37 is the long awaited B&D re-creation of the venerable M-203. It is single action with a cocking lever on the side. It boasts a positive trigger block safety. As with all B&D Launcher products, it chambered in 37/38 mm and made to the highest standards of American workmanship. Constructed of 6061 aircraft grade aluminum and 4140 hardened steel, it is rugged while maintaining a reasonable weight. This product has particular appeal to SWAT Launcher Specialists who might prefer to have a launcher as part of their primary armament. The UBL-37 attaches to any rifle or carbine fitted with a Picatinny Rail. You need a Picatinny- to-Picatinny clamp (see ours on this page). Based on the proven design of the Viet Nam era M-203 grenade launcher, the UBL-37 has advanced it to new levels. As always, state of the art materials are used throughout and the old plastic forward grip is now machined as part of the barrel itself. All parts are Hard Coated or Black Oxide treated. It is a perfect complement to your AR platform weapon. The UBL-37 is equipped with a 12� barrel with a full length upper Picatinny Rail for attachment to your Picatinny Rail equipped weapon. The underside of the barrel has a 3� rail at the muzzle end for bipod or other accessories. Loading is accomplished by releasing the barrel and sliding it forward to it�s positive stop. Ammunition up to 8� long can be easily accommodated. Single Action/Side mounted cocking handle. Weight � 4-lbs. 11 oz. Rails � 15.25� top, 3� bottom. Safety � Positive trigger block. No license needed under federal law.
Quantity

B&D ExD-37 EXTREME DUTY 37mm LAUNCHER
~~$899.00~~ $769.99 On Sale!
BDEXD37
We created a completely new launcher with features that have been requested from professionals in the US and abroad. The result is a launcher that is tough, impervious to dirt and grit and meets the stringent requirement of the men and women who relay on weapons such as these for crowd control, hostage situations and other Extreme Duty assignments. The ExD-37 is built to the highest standards of firearms manufacture. It is DAO with an internal hammer and a trigger pull of approximately 15 pounds. It is available with either a 12” or 16” barrel as standard with full rails top and bottom. Flip-up iron sights are available as an optional accessory at extra cost. The ExD-37 will handle 37mm ammunition made by any manufacturer. It sets the industry standard for high quality fit and finish. Aluminum parts anodized. 6061 Aluminum barrel. Bearing parts are 4140 Chrome-moly steel.Weight: 5lb. 10 oz. (12" barrel).Length: Min. 23" to Max. 27" (12" barrel). AR compatible telescoping butt stock.Custom vertical fore-grip. Hi-power firing pin spring for positive ignition. Forward Rotating Swivel.Barrel length options – 12” or 16” (please specify).Double Action Only (DAO). Completely Shrouded Hammer.Full Mil-Spec Picatinny Rails (top and bottom). Top Break. UNAVAILABLE

Quantity

GUN CLEANING CLOTH
~~$14.99~~ $9.99 On Sale!
G96GCC
Silicone cloth puts a deep (like new luster) on all metal surfaces to repel dirt, and displace moisture. Constructed of heavy-weight flannel triple-treated and fully impregnated. Size 14in. x 15in. Cleans, polishes and protects all metal and wood surfaces. Use on guns, gun sights, fishing tackle, reels, tools, scopes, and automobile accessories. Cleans: Triple treated to absorb and hold dirt and residues, etc. Polishes: Produces a deep and like new luster on all metal surfaces and on gun stock. Protects: Spreads invisible shield over all metal surfaces that repels dirt and prevents marks and displaces moisture. Triple treated with a new exclusive blend of silicone with corrosion inhibitors. It will protect metal surfaces from rust and corrosion at extreme temperatures. Directions for use: Clean surface with a high quality degreaser. Rub Gun & Reel Cloth over surface until luster appears. You have then imparted a thin impervious film that will not evaporate or dry out for extreme long periods of time. Re-wipe surface after handling your gun or reel. Gun & Reel Cloth may be used over and over again until chemical wears out.
Quantity

Note: Due to the time it takes to prepare HazMat shipping documents, there is a minimum order of five boxes of flares (50-individual flare cartridges) required. We are unable to fill orders for less than five boxes of flares. No exceptions to this policy. Only one HazMat fee applies to each order.

shopsite®

Note: A 15% cancellation fee applies to flare orders cancelled before they are shipped. Once shipped, orders cannot be cancelled. Note: A $3.99 fee will be added to your order total (for orders of $499.00 or less) or ($5.99 for orders of $499.01 and over) to help cover the cost of insuring your merchandise. All orders shipped UPS or FED EX insured. Note Further: Please double-check that you provide your correct and complete shipping address. UPS & FEDEX impose a $15 fee to correct an address. This fee will be passed on to you if you provide an incorrect or incomplete shipping address in addition to any additional shipping charges imposed by the carrier. By placing an order for merchandise on this website, you are entering into a legal contract.

Please Note: YOU MUST FURNISH A STREET ADDRESS FOR DELIVERY OF YOUR ORDER. WE CANNOT SHIP TO A POST OFFICE BOX. A signature is required at delivery since flares are a HazMat shipment.

Note: All flare orders sent signature required upon delivery. A $7.50 FEDEX or UPS signature fee will be added to your order total.

Please note that all sales are final.

If you refuse a delivery - If you refuse a delivery for an order that you made you will be charged a 15% restocking fee and the shipping back to us. The shipping back to us will be the amount of shipping that you originally paid. You will not get the shipping you originally paid back; you will receive a store credit for the purchase price of the product less 15% for the restocking fee, less the original shipping and less the return shipping. You will not receive a refund to your credit card, you will receive store credit.

NOTE: If your card is declined for your purchase, the order will be considered cancelled unless you contact us within 24-hours with a valid form of payment.

Orders are not accepted on speculation. If you place an order with us, we expect you to fulfill your obligations in receipt of the goods and to pay for it. If you cancel an order, you will be charged a 15% cancellation fee plus any additional fees as appropriate. An order placed with us is a legal contract. You cannot cancel without penalty - no matter what the reason. DUE TO THE CURRENT POLITICAL SITUATION, DEMAND FOR AMMUNITION & OTHER PRODUCTS IS VERY HIGH. YOU CAN EXPECT A DELAY OF AT LEAST 3 - 4 WEEKS FROM THE TIME YOU PLACE YOUR ORDER. IN SOME CASES, THE DELAY WILL BE LONGER. IF YOU CANNOT WAIT, DO NOT ORDER.